• Phone 1.800.843.4242
  • info@weberpackaging.com
  • 711 W. Algonquin Rd., Arlington Heights, IL , USA
Model 5300 tamp-blow label printer applicator


5300 Tamp-Blow Label Printer Applicator

Model 5300 tamp-blow label printer applicatorThe Weber exclusive 5300 tamp-blow print-apply system provides high-resolution printing and high-speed operation combined with the highly-accurate tamp-blow method of label application. This allows you to add a non-contact method of labeling your products quickly and efficiently on your production line.

 Choose from a wide range of 203-, 300- and 600-dpi print engines from Zebra or Sato

• Thermal transfer or direct thermal printing

• Heavy-duty 24/7 usage
 Capable of handling print speeds up to 16 ips
 Numerous I/O's ease interfacing with external devices
 Monitor operation via a web browser

• Various tamp lengths and pad sizes available
 Available with RFID capability




Features

5300 Tamp-Blow Label Printer Applicator
Model 5300 print apply systemWeber's Model 5300 tamp-blow system is redefining the meaning of versatility in pressure-sensitive label printing and application.

In addition to offering a broad selection of high-quality print engines that feature various print resolutions and label dispensing rates, this Model 5300 system is available with optional RFID print-encode engines.

Standard direct- and thermal-transfer print engines from manufacturers Zebra, SATO and Datamax produce text, bar codes and graphic images at 203, 300 or 600 dpi. The Zebra-based RFID models combine these printing capabilities with the encoding and verification of RFID inlays to meet EPC Gen 2 protocols.

Special Features & Options

The Model 5300 tamp-blow system includes a number of noteworthy features that add to the operational versatility of this printer-applicator.

• Tamp-blow application. This is a very popular method of air-assisted label placement used with standard applications, and is particularly useful in the labeling of recessed areas. A printed label is fed onto a tamp pad and held by vacuum, a pneumatic cylinder extends to within .25 inch of the product, and the label is blown onto its surface to a placement accuracy of 0.03".

Model 5300 label printer applicator controllerModel 5300 controller

Browser-based monitoring. The status of all operational functions and configurations can be monitored by logging on to a web page that is unique to each Model 5300 unit.

Numerous I/O's. The system can be interfaced with many types of external devices.

One-to-one media consumption. Special label unwind and rewind dimensions are matched to the system's ribbon supply to ensure they are consumed at the same rate, reducing downtime and eliminating partial changeovers.

Print job storage. Multiple label printing formats can be stored in the system's memory, making it easier for an operator to select a job directly from the applicator instead of downloading a computer file.

The Model 5300 tamp-blow system boasts numerous additional features as well, including an upgradeable microprocessor controller, various inputs/outputs, plus durable construction that will withstand harsh industrial environments.

There also are several optional enhancements that can increase the system's functionality. A product height sensor, for example, enables the printer-applicator to label items of varying heights delivered by the same conveyor.

Other options include a 15-foot umbilical connection that enables the remote location of the unit's controller; an adjustable stand for optimum system orientation; label-on-pad and product-presence sensors; plus beacon light alerts to signal the status of label and ribbon supplies.

Specifications

Dimensions
29.92"L x 27.25"W x 28.25"H
(75.9cm x 69.2cm x 71.8cm)

5300 Tamp-Blow label printer applicatorWeight
174 lbs. (78.8kg)

Electrical
115 VAC, 60 cycle, 5 amps; overload protection built in 220 VAC, 50 cycle optional

Air Requirements
3 cfm at 90 psi

Product Sensing
Photoelectric

Communication Interface
RS-232-C; Centronics compatible

Product Sensing
Photoelectric

Processor
Rabbit 3000 Microprocessor

Printing Methods
Direct-thermal and thermal-transfer

Print Resolution
203, 300 or 600 dpi, dependent upon print engine selected

Label Roll Size
Maximum diameter 13.75" O.D. (350mm)

Labeling Speed
Contingent upon print engine and label size/content

Label Placement
Accurate to ±0.03" (.76mm) when labels are produced to specifications and product handling is controlled and consistent

Labels
Die-cut, waste removed with 0.125" (3mm) minimum separation between labels in running direction and 0.125" (3mm) maximum web over label width; direct or thermal-transfer

Labeling Software
Weber Legitronic® software

Print Characters & Bar Codes
Text: Selection of fonts, including OCR-A & B representation

Bar Codes: UPC-A/E, EAN-8/13, Code 39, I 2 of 5, Code 128, Codabar, MSI, 2 of 5, Code 93, UPC Bookland, Matrix 2 of 5, Postnet, UCC/EAN 128, PDF-417, Maxicode, Data Matrix
(Text and bar codes can be rotated 360 degrees; horizontal and vertical character expansion)

Max Print Width
• Zebra ZE500-4 203 and 300 dpi: 4.1" (104mm)
• Zebra ZE500-6 203 dpi: 4.1" (104mm)
• Zebra ZE500-6 300 dpi: 6.6" (168mm)
• Sato 8460SE: 6.0" (152.4mm)
• Sato 8485SE: 5.0" (127mm)
• Sato 8490SE: 4.4" (112mm)
• Sato S84 Series: 4.09" (104mm)
• Datamax A-4212: 4.094" (104mm)
• Datamax A-4310: 4.161" (105.7mm)
• Datamax A-4606: 4.157" (105.6mm)
• Datamax A-6212: 6.614" (168mm)
• Datamax A-6310: 6.401" (162.6mm)

Print Speed & Resolution
• Zebra ZE500-4 203 and 300 dpi: Up to 12.0"/second (305mm)
• Zebra ZE500-6 203 dpi: Up to 12.0"/second (305mm)
• Zebra ZE500-6 300 dpi: Up to 10.0"/second (254mm)
• SATO 8460SE: Up to 8.0"/second (203mm) @ 203 dpi
• SATO 8485SE: Up to 12.0"/second (305mm) @ 203 dpi
• SATO 8490SE: Up to 8.0"/second (203mm) @ 300 dpi
• SATO S84 Series: Up to 16", 14" or 6"/second (406mm, 355.5mm, 152.4mm) @ 203, 300 or 600 dpi
• Datamax A-4212: Up to 12.0"/second (305mm) @ 203 dpi
• Datamax A-4310: Up to 10.0"/second (254mm) @ 300 dpi
• Datamax A-4606: Up to 6.0"/second (152mm) @ 600 dpi
• Datamax A-6212: Up to 12.0"/second (305mm) @ 203 dpi
• Datamax A-6310: Up to 10.0"/second (254mm) @ 300 dpi

Label Width Range
• Zebra ZE500-4 203 and 300 dpi: 0.625" (16mm) to 4.5" (114mm)
• Zebra ZE500-6 203 dpi: 0.625" (16mm) to 4.5" (114mm)
• Zebra ZE500-6 300 dpi: 0.625" (16mm) to 7.1" (180mm)
• Sato 8460S: Max 6.5" (165.1mm); Min 1.0" (25.4mm)
• Sato 8485SE: Max 5.25" (133.3mm); Min 1.0" (25.4mm)
• Sato 8490SE: Max 5.25" (133.3mm); Min 1.0" (25.4mm)
• Sato S84 Series: Max 5.1" (129.5mm); Min 0.5" (12.7mm)
• Datamax A-4212: Max 4.65" (118mm); Min 1.0" (25mm)
• Datamax A-4310: Max 4.65" (118mm); Min 1.0" (25mm)
• Datamax A-4606: Max 4.65" (118mm); Min 1.0" (25mm)
• Datamax A-6212: Max 6.7" (170mm); Min 2.0" (50mm)
• Datamax A-6310: Max 6.7" (170mm); Min 2.0" (50mm)

Optional Features
• Adjustable Stand
• Quick-change tamp pad
• RFID upgradeable print engine
• Label-on-pad sensor
• Product-presence sensor
• Beacon alert lights





Get info on the Weber Model 5300 labeling system