Weber's Model 5300 print-apply system is redefining the meaning of versatility in heavy-duty, 24/7 pressure-sensitive label printing & application. A wide range of application methods make the 5300 the go-to label printer applicator for just about any application.
• Modular design provides numerous label application configurations
• Choose from a wide range of 203-, 300-, and 600-dpi print engines
• Capable of handling print speeds up to 16 ips
• Numerous I/O's ease interfacing with external devices
• Monitor operation via a web browser
• Available with RFID capability
Find the right label printer applicator for your products:
Model 5300 Tamp-Blow Label Printer Applicator
The 5300 tamp-blow print-apply system is a very popular method of air-assisted label placement used with standard applications, and is particularly useful in the labeling of recessed areas on products. The 5300 tamp-blow can label top, sides, front or back of containers.
Model 5300 Twin-Tamp Label Printer Applicators
Prints and applies two labels to the front and side of a product; or its side and back; or one label can be placed on the front, side or back of an item using tamp-blow technology.
Model 5300 Air-Blow Label Printer Applicators
This non-contact method of label application uses air to blow the label onto the product from a fixed distance without the aid of a pneumatic cylinder.
Model 5300 Swing-Tamp Label Printer Applicators
Labels are applied to the front or back of a product using a 90-degree swing arm applicator that reaches over the conveyor and tamp-blow technology.
Model 5300 Split-Tamp Label Printer Applicators
Prints and applies a label around the corner of a box or product using tamp-blow technology. Creates a tamper-evident closure on medical device boxes.
Model 5300 Corner-Wrap Label Printer Applicators
One label is wrapped around the corner of a case using an articulating, contact method of application. Helps with dual-panel labeling rwquirements on cartons.
Model 5300 Tamp-Blow Pallet Label Printer Applicators
When you need to label pallets at a distance, this system uses an extended tamp cylinder to label one side of a pallet as it passes.
Model 5300 Dual Label Pallet Label Printer Applicators
Sometimes your pallets need to have labels on adjacent sides for identification. This method uses a swing arm for the printing and application of adjacent sides of pallets in line.
Model 5300 Swing-Tamp Pallet Label Printer Applicators
This print-apply system uses a swing arm to reach around the front or back of a passing pallet and apply a label.
Model 5300 Tire Wrap Label Printer Applicators
This system accurately and securley prints and applys labels to the outer diameter of passing tires on a conveyor. Perfect for required tire industry labels.
Model 5300rfid Label Printer Applicators
Prints, encodes, verifies and applies RFID smart labels to cartons and pallet loads in one automatic operation. Automatic label rejection if label doesn't scan correctly.
Model 5100 & 5200 Label Printer Applicators
Effective June 30, 2019, Weber is announcing the manufacture, service and support discontinuation designated as End of Life (EOL) and End of Service (EOS) for the Model 5100 and the Model 5200 label printer applicators. No further support will be provided once the End of Service timeline is reached. Weber will maintain spares and support capability throughout the life of all contracts currently in place. It is strongly suggested that customers look at migrating to one of our current printer applicator solutions.